Owner's Manual

Pictures 1 to 4 show the range of incremental adjustments

that can be made without damaging the eccentric when the

eccentric screws are tightened.

NB. The thin section of the eccentric is moving from the 3

O’clock position through the 12 O’clock position and

ending towards the 9 O’clock position.

Picture 5 shows how the eccentric should NOT be positioned when making

adjustments. The eccentric screws should NEVER be tightened when the thin

part of the eccentric is positioned between 9 O’clock, through 6 O’clock and

back towards 3 O’clock. THIS WOULD CAUSE IRREVERSIBLE DAMAGE TO THE

ECCENTRIC WHEN THE ECCENTRIC SCREWS ARE TIGHTENED

If the eccentric reaches this point and the chain still needs tensioning, return to

start position (3 O’clock) and remove a chain link to repeat the process over

again.



✓