User Guide

5
Chapter 3 Installation
3.1 General
3.2 Installation
3.2.1 Preparation
Ensure that the floor of the installation site is flat and horizontal to within 13 mm, (i.e. +/- 6.5 mm).
3.2.2 Positioning the Isolators
1) Position the isolators in approximately the correct position for the table – see Fig. 3.1 for dimensions. Note the position
of the Schraeder valves and orientate the isolators as shown.
Fig. 3.1 Isolator positions
Height mm (in.) Load Capacity kg (lb) Part Number
600 (24) 275 to 1100 (600 to 2425) PTP702
700 (28) 275 to 1100 (600 to 2425) PTP703
600 (24) 550 to 2400 (1200 to 5280) PTH702
700 (28) 550 to 2400 (1200 to 5280) PTH703
Note
During item 1, two people, one on each side, should be employed in positioning the supports.
Schraeder valve
0.55 x L
W - 280mm
L
W