Daim Ntawv Qhia Tus Neeg Siv

PD1D Piezo Inertia Drive Stage Chapter 2: Safety
Page 2 CTN017322-D02
Chapter 2 Safety
2.1. Safety Information
For the continuing safety of the operators of this equipment, and the protection of the equipment itself, the operator
should take note of the Warnings, Cautions and Notes throughout this manual and, where visible, on the product
itself.
The following safety symbols may be used throughout the manual and on the equipment itself.
SHOCK WARNING
A shock warning is given when there is a risk of injury from electrical shock.
WARNING
A warning is given when there is danger of injury to users.
CAUTION
A caution is given when there is a possibility of damage to the product.
NOTE
This is a clarification of an instruction or additional information.
2.2. General Warnings
WARNING
If this equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired. In particular, excessive moisture and/or dust may impair operation.
Spillage of fluid, such as sample solutions, should be avoided. If spillage does occur, clean up
immediately using absorbent tissue. Do not allow spilled fluid to enter the internal mechanism.
The equipment is for indoor use only.
The equipment is not designed for use in an explosive atmosphere.
When running custom move sequences, or under fault conditions, the stage may move unexpectedly.
Operators should take care when working inside the moving envelope of the stage.