Daim Ntawv Qhia Tus Neeg Siv

PD1D Piezo Inertia Drive Stage Chapter 4: Installation
Page 10 CTN017322-D02
Thorlabs offers a thin mounting adapter plate, PD1T(/M), to provide a convenient means of attaching load to PD
series stages by a central 8-32 (M4) tapped hole and other 4-40 (M2 & M3) tapped holes. Both imperial and metric
version have four 4-40 tapped holes spaced for 16 mm cage systems. Following is the example to show how to
mount a PD1T(/M) to a PD1D(/M) stage.
1. Insert two Ø2 mm, 3 mm long dowel pins into the moving platform’s two slots along the travel direction.
2. Mount the adapter plate to the stage by the alignment of the two dowel pins.
3. Insert two 2-56 (M2), 4 mm long cap screws through the adapter plate to the stage.
Figure 7 Mounting PD1T(/M) Adapter on Moving Platform
2-56 (M2) Cap Screw,
4 mm Long
Ø2 mm Dowel Pin,
3 mm Long