User Guide
Remote Control User Guide for the MX / MBX / TLX1 / TLX2 Series Chapter 2: Supported Commands
Page 14 TTN116413-D04
Command Syntax Description
Set Red LED
Brightness
RGB:RED: N N is an integer value between 0 and 100, which is used to set the
brightness of the red LEDs that contribute to the under-chassis
accent lighting.
Get Red LED
Brightness
RGB:RED? Returns an integer value between 0 and 100, indicating the
brightness of the red LEDs that contribute to the under-chassis
accent lighting.
Set Green LED
Brightness
RGB:GREEN: N N is an integer value between 0 and 100, which is used to set the
brightness of the green LEDs that contribute to the under-chassis
accent lighting.
Get Green LED
Brightness
RGB:GREEN? Returns an integer value between 0 and 100, indicating the
brightness of the green LEDs that contribute to the under-chassis
accent lighting.
Set Blue LED
Brightness
RGB:BLUE: N
N is an integer value between 0 and 100, which is used to set the
brightness of the blue LEDs that contribute to the under-chassis
accent li
g
htin
g
.
Get Blue LED
Brightness
RGB:BLUE? Returns an integer value between 0 and 100, indicating the
brightness of the red LEDs that contribute to the under-chassis
accent lighting.
Set White LED
Brightness
RGB:WHITE: N N is an integer value between 0 and 100, which is used to set the
brightness of the White accent lighting.
Get White LED
Brightness
RGB:WHITE? Returns an integer value between 0 and 100, indicating the
brightness of the White accent lighting.
Set LEDs Power
Mode
RGB:POWer: N
N is a positive integer between 0 and 2, inclusive. Set this value to
select the Accent lighting mode. The mode associated with each
value is:
0: Accent lighting OFF.
1.Accent lighting is ON and the Red, Green and Blue can be
changed independently to control the hue and the brightness.
2:Accent lighting is ON and the Red, Green and Blue are
controlled simultaneously to create the White accent lighting.
The White can be changed to control the brightness.
Get LED Power
Status
RGB:POWer? Returns a positive integer between 0 and 2, inclusive,
corresponding to the current Accent lighting mode. The mode
associated with each value is defined in the Set LEDs Power
Mode description.