Instructions
1.4 Fitting the Curtain Track - Option 2
1) Insert the two spring pins (D) into the joint as shown below. Push in each pin up to the indent mark, such that about half its
length is protruding.
2) Insert the half joint plate (F) and joint plate (E) into the extrusion in the curtain track (available separately), one into each
side of the tee joint, and slide to the required position as shown in Fig. 1.4.
3) Using the six M6 x 16 countersunk bolts (A) provided, attach the tee joint (G) to the curtain track.
4) Before hanging the curtains to the track, ensure that the floor mounting base is securely fixed to the floor as detailed in the
associated instructions for the mounting base.
Fig. 1.4 Fitting the Curtain Track Extrusion
Caution
Before starting to fit the curtain tracks, ensure that the mounting base has been fitted to the mounting column as
detailed in the instructions for the mounting base.
Exploded view of section joint
Spring pins correctly inserted
up to the indent mark
1
1
2
2
3