User's Manual

25 TECHNICAL DATA
Technical Data
Measured values = typical values
Belt drive electronic-controlled DC motor
Mains voltage
(Mains set)
100 – 240 V (AC)
Line frequency 50 / 60 Hz
Power requirement 1,5 W
Platter speeds 331/3, 45 , 78 U / min
Wow and flutter (DIN/WRMS) ± 0,07/0,04 %
Platter Ø 304 mm
Signal-to-noise ratio (DIN 45 500)
Rumble unweighted signal-to-noise ratio
Rumble weightes signal-to noise ratio
46 dB
72 dB
Eective tonearm length 211 mm
Oset angle 26°
Overhang 19,5 mm
Tangential tracking error 0,15° / cm Rad.
Cartridge HiFi DIN 45 500
rot R right channel Thorens TAS 267
grün RG right channel ground
blau GL left channel ground
weiß L left channel
Diamant stylus
elliptical
ATN 95 E
0,4 x 0,7 µm
Diamant stylus for 78 U / min
conical
ATN 9578
65 µm