User manual

24 TOP VIEW
TOP VIEW
1. 1. tonearm counterweight
The counterweight at the back of the tonearm is
used to balance the arm and to adjust the cor-
rect tracking force of the cartridge used.
2. anti-skating adjustment
Here you can adjust the anti-skating.
3. tone arm lift lever
The lift lever is used to lower the tone arm onto
the record and raise it again.
4. tonearm support with lock
The tone arm can be locked in the support.
5. Exchangeable headshell
To accommodate a pick-up system with half-
inch mounting. The headshell can be exchanged
for any other headshell with standard SME mounting.
6. START/STOP switch
„START“ switches the motor on and the platter starts to rotate. „STOP“ stops playback.
7. platter made of die-cast aluminium.
8. rubber platter mat
For holding the record.
9. 9. speed switch
Switches between 33.3 and 45 rpm.
1
2
3
4
5
6
7
10
8
9
11 12 13