Manual

Tracking Force

The tracking force can be adjusted by rotating the to-

nearm counterweight (➔ Fig. 4). The closer the counter-

weight is to the cartridge, the higher the tracking force.

The tracking force can be set with the help of the sup-

plied stylus balance. Lower the tonearm lift, move the

tonearm out over the platter and carefully lower it until

the stylus of the pick-up cartridge comes to rest on the

stylus balance. The stylus guard must be removed for

this procedure.

Great care should be taken to avoid damaging the

stylus.

Note: Refer to the user manual of your pick-up car-

tridge to determine the correct tracking force.

Fig. 4

Do not move the ring that sits around the middle of

the tonearm tube (➔ Page 30, Fig. 3). It serves as a vi-

bration damper and is effective only at its original

position.