User manual
44 EXPERT SETTINGS
CARTRIDGES WITH DIFFERENT INHERENT
WEIGHTS
The counterweight of the TP150 tonearm is
made of two parts in order to balance cartridg-
es with dierent weights. The two parts are
connected with two screws that can be easily
loosened (Fig 13). However, it is advisable to
adjust the weight so that it is as close as possi-
ble to the bearing of the tone arm in order to
minimize the leverage eect on the arm. There-
fore, always check first whether the arm can
be balanced with the two weights connected.
If this is not possible, unscrew the rear part of
the weight.
If both weights are in combination, pickups up
to approx. 30 g own weight can be balanced.
Fig. 13