User manual

Unpacking and setting up

Carefully remove the record player and acces-

sories from the packaging.

Warning: various accessories, such as the ex-

ternal power supply and the dust cover hinges,

are inserted in their own areas of the polysty-

rene inserts.

Place the turntable on a level surface and re-

move the two transport securing screws on the

top board to the right and left of the platter axle

(Fig. 1). They ﬁx the sub-chassis and prevent

it from swinging uncontrollably and possibly

being damaged during transport.

Place the drive belt around the inner platter (Fig

2), place the platter on the centre axle and then

place the belt through one of the two large

holes in the platter around the drive pulley of

the motor to the left of the centre axle (Fig 3).

This completes the installation of the drive.

Fig. 1

Fig. 3

Fig. 2

UNPACKING AND SETTING UP