Manual

2. Connect the MM 002 to your amplier
Use high-quality RCA interconnect cables to connect
the MM 002 to an auxiliary line-level input on your ampli-
fier (Aux, Tape in, CD, Tuner, etc.).
Please ensure that the right channel output is connect-
ed to the right channel input on your amplifier, and the
left channel output is connected to the left channel input
on your amplifier.
If your amplier is already equipped with a phono
stage and you are upgrading your system with the
MM 002, do not connect the output of the MM 002 to
the phono input: this is meant to be connected only to
a turntable’s cartridge output, not to a line level output
such as that of the MM 002.
4
Installation and Operation
1. Connect your turntable to the MM 002
Plug the leads from your turntable’s cartridge to the in-
put sockets on the back of the MM 002: the Right chan-
nel (red) cable into the Right input and the Left channel
(white) into the Left input. If your tonearm has a separate
earth wire for shielding purposes please connect it to
the earth binding post on the rear panel of the MM002.
Your amplier should be powered off or muted and
the MM 002’s power supply should not yet be con-
nected.