INSTRUCTION MANUAL TWC2402 1
TABLE OF CONTENTS Contents ● ● Page# Wine Cooler Package Contents 3 Important Safety Instructions 3 Main structure of Product 4 Installation 5 Temperature setting 6 Points of intentions 7 Product parameters 7 Layout and storage 7 Care and maintenance 8 Troubleshooting guide 9 Warranty 10 2
● Wine Cooler Package Contents Instruction Manual 10 Standard Shelves ● Important Safety Instructions WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or disconnect the appliance from the power supply before servicing. Read all instructions before using the wine cooler. DANGER: Risk of child becoming trapped in new wine cooler, old wine cooler/refrigeration unit, or large boxes.
Main Structure Of Product 1. Top hinge 2. Stainless steel glass door 3. Stainless steel handle 4. Exhaust grill 5. Adjustable Feet 6. Control panel 7.
Installation Install handle Locate the handle(1)over the pins(3)of the door and tighten the handle by screwing the Allen key grub screws(2) CAUTION: do not over tighten the screws 5
Temperature Setting The setting should be operate in the control panel. （1） Functions of each keys in the control panel. ①Up Used to raise (warm)the set temperature by 1℃ or 1℉. When the screen is flashing, press it once, the temperature setting is up by 1℃ or 1℉, the highest setting temperature is 20℃(68℉). Stop to press any button for 5 seconds, then the number stop flashing to show the actual temperature of the cabinet. ②Down Used to lower (cool) the set temperature by 1℃ or 1℉.
（3）Defrosting The unit defrosts automatically. The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray by the compressor where it evaporates. When the wine cooler run for some time, the wine cooler will enter to defrosting, the compressor stop running and the fan will keep running.
You can crease your wine cooler storage capacity by removing shelves and stacking bottles on top of one another. Do not stack more than 3 rows of bottles per shelf. ●Care Maintenance Cleaning your wine cooler Turn off the power, unplug the appliance, and remove all items including shelves and rack. Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a pint of water. Wash the shelves with a mild detergent solution.
Ensure that the unit is adequately ventilated. Never cover air vents. Only open the door for as long as necessary. ●Troubleshooting Guide Problems with Your Wine Cooler Many common issues with your wine cooler can be solved very easily. Try the troubleshooting tips below should you experience any problems. PROBLEM POSSIBLE CAUSE Wine Cooler does not operate. Not plugged in. The appliance is turned off. The circuit breaker tripped or a blown fuse. Wine Cooler is not cold enough.
●Warranty This product has been manufactured by Thor Group, 13831 Oaks Ave, Chino, California 91710. Thor Group disclaims all express warranties except for the following: This warranty applies to products purchased and located in the United States. Products purchased or located outside this area are excluded.
6. Service to repair or replace consumable parts. Consumable parts are not included in the warranty coverage. 7. The removal and reinstallation of your wine cooler if it is installed in an inaccessible location or is not installed in accordance with published installation instructions. 8. This warranty is void if the factory applied serial number has been altered or removed from your wine cooler. 9. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. 10.
