TRF3601FD
REFRIGERATOR WITH ICE AND WATER DISPENSER TRF3601FD
TABLE OF CONTENTS 1 Safety warnings 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Warning Meanings of safety warning symbols Electricity related warnings Warnings for using Warnings for placement Warnings for energy Warnings for disposal 2 Proper use of the refrigerator 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.
1 SAFETY WARNINGS 1.1 Warning Warning : risk of fire / flammable materials THIS appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar nonretail applications.
1 SAFETY WARNINGS REFRIGERANT and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm. CHILDREN should be supervised to ensure that they do not play with the appliance.
1 SAFETY WARNINGS 1.2 Meaning of safety warning symbols Prohibition symbol Warning symbol Note symbol This is a prohibition symbol. Any incompliance with instructions marked with this symbol may result in damage to the product or endanger the personal safety of the user. This is a warning symbol. It is required to operate in strict observance of instructions marked with this symbol; or otherwise damage to the product or personal injury may be caused. This is a cautioning symbol.
1 SAFETY WARNINGS 1.4 Warnings for using Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist. Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger. The gaps between refrigerator doors and between doors and refrigerator body are small, be noted not to put your hand in these areas to prevent from squeezing the finger.
1 SAFETY WARNINGS Freezing chamber Do not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; or otherwise the bottles or enclosed containers may crack due to freezing to cause damages. 1.
2 PROPER USE OF REFRIGERATORS 2.1 Placement Keep the refrigerator upright to avoid being extruded or vibrated during transportation. Avoid over 45 degrees during tilt angle handling. Avoid excessive stress on the door or top cover when the refrigerator is moved; in addition, it may deform. Before use, remove all packing materials, including bottom cushions,foam pads and tapes inside of the refrigerator;tear off the protective film on the doors and the refrigerator body.
2 PROPER USE OF REFRIGERATORS 2.2 Levelling feet (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor) Adjusting procedures: a. Turn the feet clockwise to raise the refrigerator; b. Turn the feet counterclockwise to lower the refrigerator; c. Adjust the right and left feet based on the procedures above to a horizontal level.
2 PROPER USE OF REFRIGERATORS 2.3 Levelling door List of tools to be provided by the user plier Hinge grommet Pliers Fastener-ring Lower hinge (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor) 1) Raise the lower door up to the level of the higher door. 2) Insert the supplied fastener-ring by using plier in the gap between the hinge-grommet and the lower hinge .
2 PROPER USE OF REFRIGERATORS 2.4 Door handles Assembly Instructions of Cold Storage Door Handle: 1. 2. 3. Take the handle set bolts out from the refrigerator, use cross recessed screwdriver to set the bolt on the door. Fix it tight with all the screw thread twisted through the hole, as shown in the figure; After the first step is completed, take the Cold storage door handle out from the box, place it as per direction shown in the figure (Note: i.e.
2 PROPER USE OF REFRIGERATORS 2.5 Adjustment of cantilever rack Adjustment of cantilever rack The cantilever rack could be adjusted to the proper height as required by food. Please adjust the cantilever rack by following the arrows as shown in the diagram. Raise it upward first and then take it out by tilting it upward.
2 PROPER USE OF REFRIGERATORS 2.6 Installing Filter 1.When the refrigerator is used for the first time, press down the marks on both sides of the filter cover by hand and open the filter cover downward; 2.Then rotate the dustproof plug anticlockwise and remove the dustproof plug; 3.Remove the exterior package of the filter, rotate the filter clockwise and press the filter element, and install the filter element at the joint position of the refrigerator filter until the filter element can not rotate; 4.
2 PROPER USE OF REFRIGERATORS 2.7 Installing the water line Connecting the water line Most homes are equipped with water line installation parts. If yours is not or needs replacing, water line installation kits are available to purchase from BSH part number 00646836 or from a hardware store/dealer. 1. Shut off the main water supply line. 2 . Install a shut-off valve and water line compression thread (UNS 7/16-24), accessible with product in place.
2 PROPER USE OF REFRIGERATORS 2.8 Changing the Light Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person. 2. 9 Starting to use Before initial start, keep the refrigerator still for two hours before connecting it to power supply. Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
3 STRUCTURE AND FUNCTIONS 3.1 Key components (Refrigerating chamber) LED lighting Ice maker Door tray Turnover box Door tray Filter Door tray Shelf Shelf Shelf Two vegetable case Flex Drawer Freezer Drawer (Th e picture above is only for reference.
3 STRUCTURE AND FUNCTIONS Dispay screen Flex Drawer Upper freezer drawer Lower freezer drawer (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor) Refrigerating chamber The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term. Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
3 STRUCTURE AND FUNCTIONS 3.2 Functions ① A B C D E ② F I H J The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor Display screen ① Temperature zone display Operation key ② Temperature shift gear A. Temperature downward B. Temperature upward C. Refrigerating chamber button F. Initial button for refrigerating the madeice D. Freezing chamber button E. Flex Drawer button H. Filter prompt I. Energy saving Mode J.
3 STRUCTURE AND FUNCTIONS Temperature setting of flex drawer Press the flex drawer key to select temperature shift zone, and press the temperature shift key again to adjust the temperature of flex drawer. The temperature shift key is pressed once, the temperature will be increased by 1 gear, When the temperature is increased to WINE (4th gear), press the temperature shift key again, the temperature will return to MEAT(1st gear).
3 STRUCTURE AND FUNCTIONS ECO mode Press ENERGY SAVING key to enter the ECO mode, and the backlight will be on; the quick-freezing mode is cancelled at the same time. The quick freezing is controlled at - 14°C/7°F and refrigerating at 7°C/45°F. Press the ENERGY SAVING key again to exit the ECO mode, the backlight will be off, and the temperature of freezing and refrigerating will return to the set temperature before entering the ECO mode.
3 STRUCTURE AND FUNCTIONS 3.3 Fetching water and Ice The ice/water dispenser is located on the outside of refrigerating chamber door. It offers a choice of cubed or crushed ice, or cold water. The dispenser only works when the refrigerating chamber door is closed. 1) Fetching cold water a、Keep pressing the buttons WATER until the indicator turns on. b、Push the container in the direction of fetching water cushion,Cold water starts to flow into the container.
3 STRUCTURE AND FUNCTIONS 3.4 Disassembly of refrigerator door Method for disassembly of variable temperature door: 1. Remove the variable temperature drawer; 2. Pull the variable temperature door to the maximum stroke, demount harness cover with screwdriver or electronic runner for screw fixation, and remove the harness cover; 3. Demount harness with screwdriver or electronic runner for fixation and clamping with screw, and unplug the connecting terminal; 4.
4. MAINTENANCE AND CARE OF THE REFRIGERATORS 4.1 Overall cleaning Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect fect and energy saving. Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent. The interior of the refrigerator should be cleaned regularly to avoid odor.
4. MAINTENANCE AND CARE OF THE REFRIGERATORS 4.
4. MAINTENANCE AND CARE OF THE REFRIGERATORS 4.4 Cleaning of ice storage box When you need to use a lot of ice, or take ice abnormally, or need to clean the ice storage box, you can take out the ice storage box, but please put it back in time. 1. Hold the button of the ice storage box with your hand, press it gently, and then pull it out horizontally; 2. Push the ice storage box in slightly after cleaning. Note: Please remove the ice in time which falls in the ice making chamber during pulling out.
4. MAINTENANCE AND CARE OF THE REFRIGERATORS 4.5 Defrosting The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel. 4.
5 TROUBLE SHOOTING 5•1You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.
5 TROUBLE SHOOTING After you install the water line and start the refrigerator, it takes 12 hours to start ice making Please turn on the ice making function (see the UI instructions) Ice maker does not make ice Check whether the water pressure meets 30-100psi and whether the water line is connected normally, Check whether the water supply valve is open and whether the water pipe is bent Check whether the ice storage box is installed, Check whether there is ice in the ice storage box.
6 WARRANTY Warranty&Service This product has been manufactured by Thor Group, 4651 E Airport Dr, Ontario, CA 91761 For Customer Service, please call (877) 288 - 8099 For the most up to date warranty and service policy, please refer to our website WWW.THORKITCHEN.COM/WARRANTY-REGISTRATION For in-warranty service requests, please visit our website at WWW.THORKITCHEN.
WELCOME TO THE CLUB You chose THOR Kitchen to enhance your culinary journey and we’re stoked to have you in the club. Think of it as a secret society of really savvy people, such as yourself, choosing professional power and performance at an affordable price. Register your product by following the steps below. WARRANTY REGISTRATION Scan theQR code or visit thorkitchen.com/warranty Input your product info and select register You’re done. Let’s get cookin’.
