service@thorgroup.us +1 877-288-8099 THOR KITCHEN OUTDOOR Pizza Oven Cabinet Installation Manual MODEL# MK07SS304 IMPORTANT: Save for electrical inspector’s use. Installer: Leave installation instructions with the homeowner. Homeowner: Keep installation instructions for future reference.
service@thorgroup.us +1 877-288-8099 Welcome Thank you for purchasing your Thor Kitchen Appliance! We appreciate your business and we recommend that you read this entire User’s Manual before operating your new appliance for the first time. This manual contains instructions on how to properly install and set up your new range, as well as insights into the unique features that our product offers.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Parts List If you are missing any part, please contact Thor Kitchen Customer Service Department at 877-288-8099 at business hours, or email service@thorgroup.us for help. Explosive # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Part # 05.99.000119-000-A0 05.19.008003-000-A0 22.99.009241-000-A0 22.99.009239-000-A0 05.99.008024-000-A0 06.04.000377-000-A0 22.99.009243-000-A0 20.01.008025-000-A1 20.01.008022-000-A1 20.01.008018-000-A0 20.99.
service@thorgroup.us +1 877-288-8099 35 36 05.99.000200-000-A0 05.99.000201-000-A0 37 06.02.000093-000-A0 38 39 40 41 42 43 44 06.10.000042-000-A0 06.11.008056-000-A0 06.09.000099-000-A0 04.01.002580-000-A0 04.01.002579-000-A0 06.04.000030-000-A0 06.09.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Cabinet Installation Step 1 1. Install 2 pcs supporting legs (Part # 18) to bottom welding part (Part # 21) and adjust the supporting legs to suitable position; 2.
service@thorgroup.us +1 877-288-8099 Step 2 1. Use 2 pcs Philips thumb head screw (Part # 38) to install Kick panel plate (Part # 17) to Part # 21; 2. Use 3 pcs ¼” flat Philip’s screw head (Part # 37) to connect left side panel (Part # 10) to Part # 21; 3. Use 3 pcs Part # 37 to connect right side panel (Part # 25) to Part # 21; 4. Use 8 pcs Part # 37 to connect back panel (Part # 26) to Part #21, # 10 and #25; 5.
service@thorgroup.us +1 877-288-8099 Step 3 1. Use 4 pcs Part # 37 to connect beam welding part (Part # 24) to Part # 10 and Part # 25; 2.
service@thorgroup.us +1 877-288-8099 Step 4 1. Make sure all the connections are smooth and the design is looking like below picture.
service@thorgroup.us +1 877-288-8099 Step 5 1. Use 2 pcs ¼” 14” screw (Part # 37) to go through the two holes on Pizza oven door handle assembly (Part # 67), then go through 4 pcs mica plates (Part # 6), 2 pcs ¼” flat gasket (Part # 43), 2 pcs ¼” spring gasket (Part # 44), and 2 pcs ¼” hexagon nut (Part #40) to install Part # 7 to Pizza oven door assembly (Part # 8).
service@thorgroup.us +1 877-288-8099 Step 6 1. Use 4 pcs ¼” Philips thumb head screw with anti-slip design (Part # 37) to put 2 pcs ash pan holder (Part # 32) to the back of Pizza oven cavity (Part # 4); 2. One part # 32 are installed, install ash pan welding assembly (Part # 27).
service@thorgroup.us +1 877-288-8099 Step 7 1. Use 1 pc ¼” nut (Part # 40) and 1 pc ¼” flat gasket (Part # 43) to connect chimney coping (Part # 1) to chimney supporting rod (Part # 2) 2. Install Part # 1 and # 2 to the top of Chimney Pipe Assembly (Part # 3); 3.
service@thorgroup.us +1 877-288-8099 Step 8 1. Put 4 pcs Cordierite Brick B (Part # 28), 2 pcs Cordierite Brick A (Part # 29) and 1 pc net cover (Part # 30) inside Pizza oven Cavity (Part # 4) 2. Insert Pizza oven door assembly (Part #8) into designated position on Part # 4. 3. Maximum Temperature inside the Pizza Oven Cavity is 800 F.
service@thorgroup.us +1 877-288-8099 Step 9 1. Use 6 pcs ¼” Philips thumb head screw with anti-slip design (Part # 37) to install Pizza oven cavity (Part # 4) to Cabinet left side panel (Part # 10) and Cabinet right panel (Part # 25). Make sure the connection is smooth; 2. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.us +1 877-288-8099 Step 10 1. Use 2 pcs Part # 37 to connect condiment storage welding assembly (Part # 16) to front panel assembly (Part # 15); 2. Use 24 pcs Parts # 39 to install door hinge (Part # 31) Part # 22 with Part # 10, and Part # 23 with Part # 25; 3. Connect Part # 22 with Part # 10 and connect Part # 23 with Part # 25; 4. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Step 11 1. Use 4 pcs Part # 37 to connect Left handle welding assembly (Part # 11) to Left side panel (Part # 10), then put S-shape pothook (Part # 12) on Part # 11; 2. Use 8 pcs Part # 37 to connect side panel hook 1 (Part # 13) and side panel hook 2 (Part # 14) to the left panel (Part # 10); 4. Part # 11, # 12, # 13 and # 14 could be installed on the right panel of pizza oven cabinet (Part #2 5) if needed. Please make sure the connections are smooth.
service@thorgroup.
service@thorgroup.
