How to Guide

[e-mail] [phone]
Step 3
1. Open outdoor grill cover first and then remove the 4 screws shown in the picture (right side of the back
infrared broiler), and then remove the back infrared broiler burner orifice’s protection cover from the
back;
2. Use wrench to remove the original orifice (LP Orifice - 0.91mm) counterclockwise so that it could be
removed;
3. Use wrench to screw in NG orifice (1.31mm) clockwise; Detailed orifice information is shown below:
NG orifice (included in NG Conversion Kit)
10.05.008004-000-A0
Back Broil Burner Orifice -
NG
1.31mm
1
LP Orifice (installed with product, need to be replaced by NG orifice)
10.05.008002-000-A0
Back Broil Burner Orifice -
LPG
Φ0.91mm
1
4. Use wrench to take out LP regulator and gas pipe counterclockwise.