` Dimension and Clearance LRG4807U 25
Appendix 1 Oven Knob Installation LRG4801U / LRG4807U ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ LRG4801U / LRG4807U (From Left to Right): ①②: Surface Valve Knob ③④: Griddle/Small Oven Thermostat Knob, ⑤⑥Surface Valve Knob ⑦: Big Oven Thermostat Knob ⑧⑨: Surface Valve Knob Your range might have a KD handle that needs to be installed. Please Follow up the following procedures for the oven door handle installation.
Appendix 3 3.1 Check your Installation Kits for Door Handles 2 * Handle Holders, 1 * Installation Wrench, 1 * Handle (For 18”, 30” or 36” Oven) 3.2 Connect door handle holders to each side of the handle 3.
Appendix 3 3.4 Lay the door handle against to the oven door and fit it on the connection part, and use the wrench to get the door handle holder tight; Oven Handle Installation 3.3 Use the wrench to tighten the door handle holders.
Appendix 3 20. Rubber Pad Installation on Back Panel In order to meet the requirement for the clearance for the back of you Thor Kitchen Range, please install 2 pcs Rubber Pad provided in the manual package Please find the accessories and follow the below steps: 1. check the installation kit included in the manual package; 2 pcs screw 2 pcs rubber pad 2. Install 2 pcs rubber pad shown above.
