Installation Guide

Instructions for Converting Range Top to Operate on Liquefied Petroleum Gas
(From the top of the Range Top)
a. Electrical shock hazard can occur and result in injury or death. Disconnect electrical power to the range
before servicing. Do not remove regulator or allow it to turn during servicing.
b. Unscrew the cap from the regulator. Do not remove the spring from the regulator.
c. Unscrew the plastic insert from the cap and turn it over, so the longer stem is facing the cap.
To see the difference between NG and LP, please check the detailed pictures shown below:
**IMPORTANT** Pay attention that the NG and LP are in different direction. All the gas ranges are
initially designed with NG position, please have it changed in to LP position.
2.Convert Top Burner for LP/ Propane Gas
A. HRT3003U (original)
HRT3003U (old design): Left front burner 18K BTU, right front burner 18K BTU, left rear burner 12K BTU,
right rear burner 12K BTU.
Positon for NG
Positon for LP