Installation Guide

7
 Power on/off.
The light is green when the wine cooler is working while it’s red when it’s off(with the plug
still insert into the socket).
 Working light of the compressor.
The light is glowing when the compressor is working.
 Power.
To control the appliance turn on/off. To turn off the appliance, touch the mark and
hold for at least 5 seconds. Press again, turn on the appliance.
④ Down
Used to lower (cool) the set temperature by 1℃ or 1℉. When number is flashing, press it
once, the temperature setting is down by 1℃ or 1℉, the highest setting temperature is 5℃
（41F）.
⑤ Up
Used to raise (warm)the set temperature by 1℃ or 1℉. When number is flashing, press it
once, the temperature setting is up by 1℃ or 1℉, the highest setting temperature is
18℃(64.4F).
⑥Temperature Display.
The LED display will show the temperature for the actual temperature of the cabinet when
normal, and it will show the setting temperature when flashing.
⑦ ℉/℃ display.
⑧Setting temperature
Press this button, the number in the window will flash, then press to set
temperature. Stop to press any button for 5 seconds, then the number stop flashing to
show the actual temperature of the cabinet.
⑨ ℉/℃ selector.
Select the temperature display setting in Fahrenheit or Celsius degree.
⑩ Light
To control the inner light turn on/off.
（2）There is automatic storage memory when power off in this wine cooler, that means
the setting temperature is memoried automatically even in power off, so the setting
temperature is the same as last setting when the wine cooler is running again.
（3）Defrosting
The unit defrosts automatically.
The evaporator behind the rear wall of the unit defrosts automatically. The condensate
collects in the drainage channel behind the rear wall of the unit, and flows through the
drainage hole into the drip tray by the compressor where it evaporates. When the wine