Installation Guide

7
Temperature Setting
The setting should be operate in the control panel.
1Functions of each keys in the control panel.
Up
Used to raise (warm)the set temperature by 1 or 1. When number “3” is flashing, press
it once, the temperature setting is up by 1 or 1, the highest setting temperature is
18(65F).
Down
Used to lower (cool) the set temperature by 1 or 1. When number “3” is flashing, press
it once, the temperature setting is down by 1 or 1, the lowest setting temperature is
541F.
Temperature Display
The LED display will show the setting temperature when “flash”; Display will show the
temperature for the actual temperature of the cabinet when normal.
④℃/ Display
Setting temperature
Press this button, the number in the window will flash, then press to set
temperature. Stop to press any button for 5 seconds, then the number stop flashing to
show the actual temperature of the cabinet.
⑥℉/ Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Power
To control the appliance turn on/off. To turn off the appliance, touch the mark and
hold for at least 5 seconds. Press again, turn on the appliance. The LED readout
will show the original temperature set previously when restart the appliance or reconnect