Specification

6
Installation
1. Open-box Check
Open the box for your Thor Kitchen Range hood, Locate power cord, mounting plate (2 pcs for certain
designs), screw sets, filters (2pcs for 30-inch and 36-inch range hood, 3 pcs for 48-inch range hood),
small filters (2 pcs for all designs) and grease tray (1 pc) inside the box. You should also have a template
showing the back layout of your range hood, including mounting plate and mounting screws.
** If you discover concealed damage of the unit or a part missing in the box, please contact your dealer
or Thor directly.
(1)Filter (2 pcs for 30-inch and 36-inch hood, 3 pcs for 48-inch hood ) (2) Filter Handle
(3) Power Cord (4) Small Filter (2 pcs) (5)Grease Filter (30, 36 or 48 inches)
2. Mounting Template
Attach the template to the wall where you want to install your Thor Kitchen Range hood, mark all the
positions for screws and outlines of the range hood and mounting plate. Use tape to place the template
to the wall.
3. Mounting plate installation
Two types of screws are included in your range hood package:
(a) (b) (c)
(1) Short Screw set (a) is used for connecting range hood to the mounting plate. 6 (or 4) screws is
needed for reach mounting plate.