Assembly Instructions Thon Studio Side Rack XL 10U Studio Rack
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 29.09.
Table of contents Table of contents 1 Safety instructions................................................................................................................................................................................................................ 5 2 Scope of delivery...................................................................................................................................................................................................................
Thon Studio Side Rack XL 10U Studio Rack
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Scope of delivery 2 Scope of delivery Before you assemble your rack, make sure the contents of package is complete according to the following list.
Installation 3 Installation Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces. Overview The following figure shows an overview of the individual components.
Installation 1 Left side panel C Wooden dowel 2 Right side panel D Woodscrew for rack rail 3 Base panel E Raised countersunk screw 4,8×16 4 Cover panel F Furniture caster 5 Front panel G Rack rail 3 U A Connector bolt H Rack rail 10 U B Connector housing I Rack rail 13 U 8 Thon Studio Side Rack XL 10U Studio Rack
Installation Preparing the components Insert the connector housings, the connecting bolts and the wooden pegs into the holes provided in the components, as shown in the figure below. Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow posi‐ tion of the connector housings points towards the hole.
Installation % & 1 Left side panel 5 Front panel 2 Right side panel A Connector bolt 3 Base panel B Connector housing 4 Cover panel C Wooden dowel 10 Thon Studio Side Rack XL 10U Studio Rack
Installation Assembling the components Place the base panel, the cover plate and the front panel onto the connecting bolts of the left side panel. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts. Place the right side panel onto the pre-assembled unit consisting of the base panel, cover panel and front panel. Tighten the con‐ nector housings clockwise to lock the connection with the inserted connecting bolts. Check all connections for tight fit.
Installation Set the fully assembled unit onto the rack rail front. Screw the four casters into the holes provided in the base panel , each with four raised countersunk screw.
Installation Set up the rack. Use the wood screws provided to screw the rack rails to the inside of the rack parallel to the front and rear edges. We recommend a distance of approx. 1.5 cm from the front edge. A mounting template is included for easy installation.
Technical specifications 4 Technical specifications Thon Studio Side Rack XL 10U black, graphite Item number 547938 Thon Studio Side Rack XL 10U white Item number 547939 Thon Studio Side Rack XL 10U oak Item number 547941 Thon Studio Side Rack XL 10U maple Item number 547944 Thon Studio Side Rack XL 10U beech Item number 547946 Rack units 3, 10, 13 Installation depth min. 340 mm Inclination 45° Dimensions (W × H × D) 540 mm × 700 mm × 620 mm Weight approx. 15.
Protecting the environment 5 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
