Assembly Instructions

Set the fully assembled unit onto the rack rail front. Screw the four casters into the holes provided in the base panel , each with four

raised countersunk screw.

Set up the rack. Screw the rack rails to the inside of the rack, parallel to the front edge, using six wood screws each. We recommend a

distance of approx. 1.5 cm from the front edge. A mounting template is included for easy installation.

D Woodscrew for rack rail F Rack rail 10 U

E Raised countersunk screw 4,8×16 G Furniture caster

Installation

Thon Studio Side Rack 10U

Studio Rack