Assembly instructions

Place the assembled frame horizontally onto the side panels.
Screw the pull-out rails to the side panels horizontally at the required height using four Euro screws each.
Insert eight wooden dowels into the holes provided in the side panels and place the table top onto the preassembled unit.
Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts.
Insert six connecting bolts into the holes provided in the top side of the tabletop.
Make sure that the stop bars are attached to the rear towards the rear wall when screwing the pull-out rails.
D
+
(
7 Table top C Wooden dowel
10 Pull-out rails D Euro screw 6.3 × 16
A Connector bolt
Installation
Thon Studio Producer Desk / FPY
11