Assembly instructions
Table Of Contents
3 Installation
Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces.
3.1 Thon Studio Producer Desk 1750 / Thon Studio Prod.Desk 1750 curved
Overview
The following gure shows an overview of the individual components.
ö
#
A
B C
D E
1 Table top
2 Table top curved
A Screw M8 × 30
B Washer
C Euro screw
D Tapping screw
E Cable feed-through
3.2 Optional accessories
Roadworx Multi Electric Stand (item # 491963)
Place the table top on the Roadworx Multi Electric Stand and fasten the table top with four M8 × 30 screws and four washers in
the ush-mounted threaded sleeves for M8 threads.
Fasten the control unit of the Roadworx Multi Electric Stand to the pre-punched positions on the left or right on the underside of
the table top with two tapping screws.
Installation
studio desk
6