Assembly instructions

Montage Thon Studio Ext. Desk 3U curved
Put the connecting bolts into the drill holes provided in the monitor bridge (12 × connecting bolts) and the connector housings
into the drill holes provided in the side panels (2 × connector housings each).
Insert the cable feed-throughs into the recesses of the monitor bridge from above.
After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐
ated component are tightened.
&
%
E
H
I
Put the six side panels on the connecting bolts of the monitor bridge and tighten the connector housings of the side panels
clockwise to lock the connection with the inserted connecting bolts.
%
&
Installation
Thon Studio Producer Desk 1750 / curved
15