Assembly instructions

Table Of Contents

Mounting side, oor and cover panels

# #

1 Side panel

2 Floor panel, cover panel

1. Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the

arrow position of the connector housings points towards the hole.

2. First place the oor and cover panel on the respective connecting bolts of a side panel and tighten the connector housings

of the oor and cover panel clockwise to lock the connection with the connecting bolts used.

3. Place the second side panel on the pre-assembled unit consisting of the side panel, oor and cover panel. Tighten the con‐

nector housings of the oor and cover panels clockwise to lock the connection with the inserted bolts.

4. Check all connections for tight t.

Installation

studio rack