Assembly Instructions Thon DJ Table 1500 DJ Table
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 14.09.
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 5 2 Scope of delivery.............................................................................................................................................................................................................. 6 3 Installation..
Thon DJ Table 1500 DJ Table
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Scope of delivery 2 Scope of delivery Before you assemble the studio desk, make sure the contents of package is complete according to the following list.
Installation 3 Installation Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces. Overview The following figure shows an overview of the individual components.
Installation Preparing the components Insert the connecting bolts into the holes provided in the side panels (13 × connecting bolts each). After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐ ated component are tightened.
Installation Place the connector housings, the connecting bolts and the wooden dowels into the holes provided in the table top (5 × connection bolts, 14 × connector housing, 12 × wooden dowel). % 4 Table top A Connector bolt B Connector housing C Wooden dowel Place the connector housings and the wooden dowels into the holes provided in the front panel (9 × connector housing, 6 × wooden dowel).
Installation Place the connector housings and the wooden dowels into the holes provided in the lower rear wall (8 × connector housing, 6 × wooden dowel). ' 6 Lower rear wall B Connector housing C Wooden dowel Assembling the components Put the front panel onto the connecting bolts of the table top and tighten the connector housings of the front panel clockwise to lock the connection with the inserted connecting bolts.
Installation Put the table top onto the connecting bolts of the upper rear wall and tighten the connector housings of the table top clockwise to lock the connection with the inserted connecting bolts.
Installation Place the assembled table top and the lower rear wall onto the connecting bolts of the right side panel. Place the left side panel onto the pre-assembled unit. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts. Check all connections for tight fit. Place the cable feed-through in the recess of the table top.
Technical specifications 4 Technical specifications Thon DJ Table 1500 WH Item number 503688 Thon DJ Table 1500 BK Item number 503689 Thon DJ Table 1500 Oak Item number 549359 Thon DJ Table 1500 Maple Item number 549363 Thon DJ Table 1500 Beech Item number 549364 Dimensions (W × H × D) 1500 mm × 900 mm × 450 mm Weight approx.
Protecting the environment 5 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
