Operation Manual

EN51
001 F 002 S
003 E
005 F
004 F 006 F
DELETE
EXIT
OFF
D
S
C
P
L
A
Y
P
L
A
Y
C
E
A
X
N
E
C
C
E
U
L
TE
Deleting Images
Previously shot images can be deleted either one at a time
or all at once.
1
Set the Power Switch to while pressing
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
A stored image is displayed.
2
Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select and press it. DSC MENU
appears.
3
Rotate MENU/BRIGHT to select IMAGE DEL. and
press it. The Sub Menu appears.
TO SELECT AN IMAGE BY BROWSING
IMAGES STORED IN MEMORY
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select SELECTED and
press it. The DELETE Index Screen appears.
5
Rotate MENU/BRIGHT to move the green frame to
the desired image that you wish to delete and press it.
An appears above the selected image.
Repeat this procedure for all images that you wish to
delete.
To deselect an image, press MENU/BRIGHT again.
The disappears.
6
Rotate MENU/BRIGHT upward to select EXIT and
press it. The Deletion Confirmation Screen appears.
7
Rotate MENU/BRIGHT to select EXECUTE and
press it. The selected images are deleted and the
normal playback screen appears.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
TO DELETE ALL IMAGES
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select ALL and press it.
The Deletion Confirmation Screen appears.
5
Rotate MENU/BRIGHT to select EXECUTE and
press it. All the images are deleted.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
NOTES:
Protected images (
pg. 50) cannot be deleted with the
above operation. To delete them, remove protection first.
Once images are deleted, they cannot be restored.
Check images before deleting.
Power Switch
MENU/BRIGHT
Wheel
Lock Button
Display
DELETE Index
Screen
CAUTION:
While deleting images, never remove the
MultiMediaCard or disconnect power, as
this may cause the memory to be cor-
rupted. Also, be sure to use the AC Power
Adapter/Charger, as a malfunction may
occur if the battery become exhausted
halfway through the operation.
Deletion
Confirmation
Screen
Downloaded from www.Manualslib.com manuals search engine