Operation Manual

P16
MAIN MENU
7.3.4 Timer
Timers can be used to schedule recordings or to switch to a certain channel at a desired
moment. It will help you not to miss your favourite events.
Use
pq to select one of the eight available timers. Press OK to advance. The Edit Timer
screen will now be displayed.
Use
pq to switch between settings and tu or 0~9 to adjust the value of a setting.
Cycle: Choose between Once, Everyday or Weekly.
Date: With Cycle set to Once: press OK to display the calendar. Use
pqtu to pick the date for the recording and confirm with OK.
With Cycle set to Weekly: Use
tu to select the day of the week at
which the timer will start.
Time: Use the 0~9 buttons to enter the time at which the timer will start.
Action: Use
tu to choose between View or Record. Select Record to set
a timed recording.
Channel: Press OK to display the channel list and use
pq, PG+/- or 0~9 to
select the channel that the receiver should use for the timed action.
Duration: Use the 0~9 buttons to digit the duration of the timer.
Once all settings are made, press EXIT to leave the menu. A confirmation banner will be
shown. Press OK to save the timer or EXIT to discard.
DELETING A TIMER
In order to delete a set timer, select it with
pq and press RED. A confirmation banner will now
be shown. Press OK to delete or EXIT to cancel.
NOTE:
In case one timer is in conflict with another or if the set time has already passed, the
receiver will display a warning and asks you how to solve the conflict.
7.4 Advanced
This sub menu gives you access to advanced functions such as updating and factory reset.
The following options are available: Common Interface, System Info, USB Update, OTA and
Factory Reset.
7.4.1 Common Interface
The receiver is equipped with one slot of Common Interface which allows access to scrambled
services with various conditional access modules and a valid smart card.
Depending from module you can read module information, smart card information, download
new software for module and set up module language.
The programs that can be descrambled are determined by the conditional access module and
smart card you use.
7.4.2 System Info
Displays valuable information about the software and hardware version of your receiver and our
web address www.thomsonstb.net. A customer support agent might ask for the information
given in this screen. Press EXIT to leave the System Info screen.
7.4.3 USB Update
This function allows you to perform a system upgrade from an USB device. You can also use it
to export/import your channel list to/from a connected USB device.