Operation Manual

MAIN MENU
P13
English
AUTO POWER DOWN
Auto Power Down is a new, power saving feature that helps you with reducing power
consumption. It will switch off the receiver when no command is given for at least the set time.
Possible settings are: 1~6 hours with one hour steps and Disabled.
Once all settings are made, press EXIT to leave the Time Setting menu. A confirmation banner
will be shown. Press OK to save your settings or EXIT to discard.
7.2.4 Parental Control
In this menu you can enable or disable the menu lock function and change the PIN code. Use
pq to highlight the setting you wish to change and tu or 0~9 to change the value of the
highlighted setting.
Menu Lock: If Menu Lock is set to Enabled, items in the Main Menu are only
accessible after entering the PIN. (DEFAULT PIN: 0000) When set
to Disabled, all menu items are freely accessible.
Change PIN Code: Use this function to set your own personal PIN code. Highlight
Change PIN Code with
pq and press OK to advance. A
banner with three fields pops up: Enter your old PIN at PIN Code.
(DEFAULT PIN: 0000) Enter your new PIN at Enter New and again
at Reconfirm. A successful change of PIN is confirmed by an on
screen message. Use EXIT to go back to the previous menu.
Once all settings are made, press EXIT to leave the Parental Control menu. A confirmation
banner will be shown. Press OK to save your settings or EXIT to discard.
7.2.5 OSD Display
This menu allows you to set the OSD (On Screen Display) functionality of your receiver
according to your wishes. Use
pq to highlight the setting you wish to change and tu or
0~9 to change the value of the highlighted setting. Press OK for a list with all available options
for the chosen setting.
Banner Show: When set to On, the info banner displaying channel name, channel
number and Now/Next information will be shown every time you
change channels. To disable the banner, set this item to Off.
Banner time (sec.): defines the time after which the OSD banners time out. Possible
settings are: 1~10 seconds.
Transparency: Defines how transparent the On Screen Display and banners are.
Possible settings are: 0%, 25%, 50% and 100%.
Once all settings are made, press EXIT to leave the OSD Display menu. A confirmation banner
will be shown. Press OK to save your settings or EXIT to discard.
TIP:
For detailed information about the “Info banner” please refer to chapter 6.2 Info Banner.
7.3 Channel
Within this menu you can manage channels and configure favourites, play files from a
connected USB storage device and to set timers. The Channel menu consists of the following
sub-menus: Sort and Edit, Favourite, File Explorer and Timer. Choose the desired sub menu
with
pq and press OK to advance.