Operation Manual

P8
OPERATION
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq or P+/P- in the Channel
List to highlight your channel of choice and press OK once to select the highlighted channel.
Press OK again to leave the Channel List. The Channel List is equipped with a filter function to
make finding your favourite channels easier. While in the Channel List, press RED. An alphabet
banner will now be displayed. Use
pq or P+/P- to select the first letter of the desired channel
and OK to confirm. All channels beginning with the chosen letter will now be displayed.
The following keys are available in the Channel list and viewing mode:
 TV/R: Toggles between TV and radio channels
 LIST: changes the satellite
 FAV: to get displayed the available favourite lists.
6.1.3 Using the P+/P- keys
P+ or p will switch to a higher channel.
P- or
q will switch a lower channel.
6.2 Info Banner
At any time during viewing mode you can press the
i
button to get info about the current
channel and program* (now and next event name and duration). Press
i
twice to see technical
details about the current channel.
* Program information is displayed when available. Availability depends from broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another
audio stream, press AUDIO in viewing mode. A list with available audio streams will now be
displayed. Use
pq to select the desired stream and confirm with OK. It is also possible to
select the DVB Subtitle, Teletext or Audio Mode from the Audio Language banner. Use the
tu
buttons to select the option of choice and use
pq to change to the setting. Once all settings
are made, press OK to apply.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TXT button in
viewing mode and use the 0~9 buttons to input the number of the page you wish to see.
The coloured buttons of the remote control allow you to jump to selected pages directly, as
indicated on the bottom of the teletext screen. Press EXIT to go back to viewing mode.
6.5 Subtitles
Some channels support a choice of different DVB subtitle languages. Press the SUB button in
viewing mode to display a list of available subtitle languages. Please refer to chapter 6.3 to read
about additional possibilities within the displayed menu.
6.6 Changing the video format
To change the video format while watching TV, simply press the V.F (sign) button in viewing
mode. A list with available HDMI resolutions will pop up. Select the desired resolution using
pq. It is also possible to change the Aspect Ratio or Conversion Mode from the Video
Format banner. Use the
tu buttons to select the option of choice and use pq to change to
the setting. Once all settings are made, press OK to apply.