Operation Manual

P6
MAIN MENU
Press pq to select the ASTRA or HOT BIRD satellite and press OK. Follow the instructions.
When you have fixed your dish at correct direction choose NEXT and press OK. The Channel
Setup menu will appear.
NOTE:
If OSD language “German” and satellite “Astra 19.2E” is chosen, the receiver will
automatically load German pre-installed channels at the beginning of the channel list.
If OSD language “Italian” and satellite “HOT BIRD 13E” is chosen, the receiver will automatically
load Italian pre-installed channels at the beginning of the channel list.
b) Your dish is aimed at another satellite
Select Other in Select satellite menu and press OK, more satellites will be listed. If you select
one out of the satellite list, the Configure Antenna menu will appear, please set the LNB
Type, LNB Low Freq, LNB High Freq, Band control, Polarisation control, DiSEqC Switch and
Antenna mode.
4.3 Antenna mode
a) Fixed dish
Set Antenna mode to Fixed, select NEXT and press OK. The Adjust antenna screen appears,
select transponder receivable at your location and adjust the antenna position for maximum
level for the signal strength and quality. When adjustment is completed, choose NEXT and
press OK. The Channel Setup menu will appear.
b) Dish mounted on DiSEqC 1.2 motor
Set Antenna mode to DiSEqC 1.2, choose NEXT and press OK. The menu Adjust antenna will
appear. Select transponder receivable at your location (choose Transponder field and select
transponder by pressing
tu). Then choose field Move Dish and adjust position of the dish by
pressing the
tu. Once you adjusted the dish position choose Store position, set number of
the position by pressing
tu. Then choose NEXT and press OK. The Channel Setup menu
will appear.
c) Dish mounted on GOTO X motor
Set Antenna mode to GOTO X, choose NEXT and press OK. The menu Adjust antenna will
appear. Select transponder receivable at your location (choose Transponder field and select
transponder by pressing
tu). Then choose field My Longitude and using numeric buttons
enter value of your longitude. Use
tu to select hemisphere East or West. Then choose field
My Latitude and numeric buttons to enter value of your latitude. Use
tu to select hemisphere
Nord or South. Choose field Goto Position and press OK. Your dish will be turned to the
position of satellite. Then choose NEXT and press OK. The Channel Setup menu will appear.
Choose NEXT and press OK to start the scan. When the scan is completed, the receiver will
save the services information automatically and exit to the normal play state.
5.0 MAIN MENU
All the important settings and features of your receiver can be operated in Main Menu. It
consists of the sub-menus: "Channel Organizer", "Installation", “System setting”, "Timer" and
"Multimedia". To open the MAIN MENU press MENU.
5.1 Channel Organiser
In MAIN MENU press pq to move to Channel Organiser and press OK to enter the Channel
Organiser menu. It consists of sub-menus “Channel Manager” and “Favourites Manager”.