Operation Manual

P4
YOUR RECEIVER
8. Power Cord Your receiver requires a current of 100~240 V AC (Auto-
selectable), 50/60Hz +/-5%. Make sure to check the
power specification before connecting your receiver to the
wall outlet.
2.4 Remote Control Unit
Fig. 3
1.
q Turns the receiver On/Standby
2. FAV Favourite group selection
3. TV/RADIO Toggles between TV and RADIO mode
4. 0~9 Channel selection or value input
5. PG-/PG+ Scroll page wise in lists
6. BACK Switches between the two last watched channels
7. INFO Shows the actual channel information
8.
pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
9.
tu Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
10. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
11. MENU Opens the main menu/ in menu you will get one step back
12. EXIT Exits from the menu or sub-menu
13. GUIDE Shows the EPG (Electronic Program Guide) in TV mode
14. V+/V- Volume up/down
15.
Mutes audio output of the receiver
16. P+/P- Program +/- (up/down in menu)
17. SUB Shows the list of subtitle languages
18. TXT Displays the current Teletext, if available
19. AUDIO Opens the audio language(s) selection for the
watched channel
20. LIST No function
21. OPT No function
22. V.F SIGN Toggles between TV and receiver (AV) mode
23. : Jump backwards during playback
24. 5 6 Fast rewind / Fast forward
25. " Jump forwards during playback
26. 4 Starts instant recording
27. 1 Play, also to use after PAUSE was used.
28. 2 Freeze picture in viewing mode / Pause in
multimedia playback.
29. 3 Stop
30. RED In viewing mode not available, selects satellite list in the
according OSD menus
31. GREEN Displays the current available Teletext
32. YELLOW Opens the list of subtitle selection
33. BLUE In viewing mode toggles between the two last
watched channels
2.5 Installing the Batteries
Remove the battery cover from the remote control and put 2XAAA size batteries inside
the compartment.