Operation Manual

YOUR RECEIVER

English

This manual provides complete instructions for installing and using this receiver. The following

symbols will serve as follow.

WARNING Indicates warning information.

Tips Indicates any other additional important or helpful information.

MENU Represents a button on the remote control or the receiver (BOLD

CHARACTER)

Move to Represents a menu item within a window. (Italic Character)

1.4 Accessories

User’s Manual

1. Remote control unit

2. 2x Batteries (AAA type)

3. IR Extender

NOTE:

The batteries should not be recharged, disassembled, electrically short-circuited, be mixed

or used with other types of batteries.

1.5 Usage of external USB devices

It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB

2.0 speciﬁcations, recording, playback and other multimedia functions of the receiver would not

work properly.

To ensure best performance of your USB storage device please format it by this receiver (menu

“Recording Device”) to FAT32 system. Other ﬁle systems are not supported by the receiver.

THOMSON cannot guarantee compatibility to all types of USB storage devices.

It is advised not to store important information on USB storage devices used with the receiver.

Always make backups of data on USB storage device before usage with receiver. THOMSON

will not take responsibility for any loss of information or circumstances caused by loss

of information.

2.0 YOUR RECEIVER

2.1 Default PIN code: 0000

2.2 Front Panel

Fig. 1

2.3 Rear Panel

Fig. 2

1. SAT OUT To connect an extra receiver to the satellite signal

from dish

2. IR IN To connect the IR Extender

3. SAT IN To connect to the LNB for satellite signal from dish

4. TV SCART To connect to your TV set using a SCART cable.

5. USB To connect an USB device ampliﬁer.

6. VCR SCART To connect to your DVD or video recorder using a SCART

cable. The video signal will be looped through to your TV

set if receiver is in stand-by mode.

7. S/PDIF Digital audio output To connect to the input of your digital audio ampliﬁer.