Operation Manual

P12
WATCHING TV AND LISTENING TO THE RADIO
6.0 WATCHING TV AND LISTENING TO THE RADIO
6.1 Program Information
In normal operation status (no menu operation), press INFO. The program information banner
will be displayed showing channel number, channel name, current, next program name (if
available from broadcast) and current time.
To check technical information about channel press INFO twice. In Program Information menu
you’ll see the current program information such as satellite name, program name and number,
local frequency, polarity, 22K tone, DiSEqC, down frequency, symbol rate, video PID and audio
PID and also the signal strength of the current program and its signal quality.
6.2 Recording Information
During a record press INFO to display or remove the record duration banner.
6.3 EPG (Electronic Program Guide)
The EPG shows a program schedule of the channels.
NOTE:
not all broadcasters provide programme information.
From normal view mode press GUIDE and pq to choose the channel, u to display
programs schedule of the current channel.
In EPG programme schedule menu: Press
pq to choose the program items. Use tu to get
programme schedules for previous/next dates. Press EXIT to return to EPG Menu. For details
of the current program press GREEN.
In programme details: Press
pq to scroll information (next/previous page). Press t or EXIT
to return to the EPG schedule menu.
Programming Timer from EPG
You can set up the event timer by pressing RED or OK from the EPG program schedule.
To set up a timer event: Press
pq to move the cursor to the program for which you want to
add a timer. Press RED to add a timer. You can also modify each value. To save the settings,
press OK. To quit event timer setup, press EXIT.
6.4 Changing channel list mode
To change between TV and radio channel lists use TV/R in normal operation mode or in
channel list mode. To change channel list to favourite in normal operation mode, press FAV.
Use
tu to select favourite group, press OK to confirm selection. Then select channel of your
choice and press OK to switch to full screen mode.
To select another favourite group or exit from favourite channel list mode, press FAV. List of
favourite channels will appear. Press RED or FAV to move focus to selection of group. Use
tu to select the desired group. Select group “NO FAV” and press OK to exit from favourite
channel list mode.
6.5 Selection Audio Language
Press AUDIO to select the audio language. Select Audio Channel or Sound mode with pq
and Audio channel number or Sound mode (Stereo, Left or Right channel). Press OK to confirm
your selection. Your selection will be memorized for current channel. Receiver will play always
the last selected audio track when you select this channel in future.
NOTE:
Audio track with “(AC3)” can only be listened if receiver is connected to digital audio
amplifier and amplifier is ON.