Operation Manual

P10
MAIN MENU
 Over Air Download (OAD)
Select this option in order to update your receiver with the latest software version. Software
update service is available from satellite ASTRA 19.2E.
NOTE:
If needed, parameters can be changed. Please ask your local THOMSON dealer in case
software update was not successful.

Update by USB
1. Download the required update file for your receiver model from our website www.
thomsonstb.net > Support
2. Unzip the file, copy it to your USB device and connect it to the USB port of receiver.
3. Select “Update by USB” and the update file and press OK.
WARNING:
NEVER power off (or disconnect) the receiver or remove the USB device during
the software update process. Doing so might cause irreparable damage to your receiver and will void
your warranty.
4. When update is completed, receiver returns to normal viewing mode and can be used
like before.
 Backup to USB
Select this option in order to store your settings, channels or complete software.
This can be helpful to re-load your channels after a factory reset or to load the channel order to
more receivers.
1. Connect USB device to USB port of receiver.
2. Select “Backup to USB” and press OK.
3. Choose between “Loader + App” or “User Database” and press OK to start back-up.
“Loader +App” will backup system loader and application, while “User Database” will
backup channel database and settings.
Do not power off your receiver during update process and flashing data. Do not unplug the
USB device during update. This may cause damage of the data in the flash memory and the
receiver will need to be repaired.
4. When backup is completed, receiver returns to “System Update” menu.
5. File “Idapp1.ssu” will be created on USB device if “Loader + App” has been selected resp.
file “userdb.ssu” if “User Database” has been selected.
 To restore user data
1. Connect USB device with backup of database to USB port of receiver.
2. Go to System Setting – System Update and select “Update by USB”.
3. Select a file with database backup (by default name of the file “userdb.ssu”) and press OK.
4. Confirm update.
Do not power off your receiver during update process and flashing data. Do not unplug USB
device during update. This may cause damage of the data in the flash memory and the receiver
will need to be repaired.
When update of database is completed, the receiver will start with channel #1 on screen.
WARNING:
NEVER power off the receiver or remove the USB device during the software update
process. Doing so might cause irreparable damage to your receiver and will void your warranty.
1. DO NOT POWER OFF THE RECEIVER DURING THE PROCESS OF DOWNLOAD.
2. DO NOT PLUG IN OR UNPLUG THE USB DEVICE WHEN RECEIVER IS
POWERED ON.