Operation Manual

MAIN MENU
P9
English
Video output
Press OK or
u to select CVBS or RGB and OK to confirm.
5.3.1.3 Time Settings
If a broadcaster provides GMT, you can set the time using GMT or set the time manually. If the
GMT usage is ON, you need to set the Time Zone. If you set GMT Usage to OFF, Set Data and
Set Time are displayed. To set the time value manually, move the cursor to the time item and
use the numeric buttons of the remote control.
5.3.1.4 Set Factory Default
Please be careful when using this function, as it will erase all the data and parameters you may
have set earlier. Once you set the factory default you will have to re-install your preferences and
re-scan channels. To reset your receiver to factory default, apply the following steps:
Select Set Factory default and press OK. Confirm warning message with OK and press OK.
The receiver will return to its factory default state and all user data will be deleted.
NOTE:
Your PIN code will change back to the factory setting “0000”.
5.3.2 OSD Style
You can set the Menu Colour, Transparency Level and Border Pattern.
5.3.3 Parental Control
You can set Channel lock status (ON or OFF), the Menu lock status, Parental setting and
Change PIN code.
The default PIN code is 0000.
Channel Lock
Set the system channel lock to ON or OFF. If lock is ON, the parental PIN code needs to be
entered to watch the locked channel.
Menu Lock
Press OK to select whether the menu should be locked or not (YES or NO), press OK to
confirm. If the menu lock is ON, you need to enter the PIN for some operations such as search
program and set factory default.
Parental Setting
If a channel is locked, the parental PIN code needs to be entered to watch the locked channel.
Use
pq to select the channel you want to lock. Press OK to lock the channel.
Change PIN
To change the PIN, you need to enter a PIN containing 4 digits and confirm it again. The system
PIN will be changed to the new PIN.
5.3.4 System info
It shows information about your receiver such as software and user interface version.
5.3.5 System Update
You can select “OAD”, “Update by USB” or “Backup to USB”.