Operation Manual

Replacing the oven light bulb
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
The bulb is located inside the oven on the back wall.
1. Rotate the lamp cover to remove.
2. Unscrew and replace the bulb with a new one suitable for high
temperatures (300°C) with the following specifications:
230V, G9, 25W.
3. Twist the lamp cover back on.
TECHNICAL DATA SHEET
Below is the sheet of domestic oven according to EU regulation No. 66/2014.
Model identification
TMFP 70 IX
Type of oven
Built-in electric oven
Mass of the appliance (M)
39kg
Number of cavities
1
Heat source per cavity (electricity or gas)
Electricity
Volume per cavity (V)
70L
Energy consumption (electricity) required to heat a
standardized load in a cavity of an electric heated oven
during a cycle in convectional mode per cavity (electric
final energy) (EC
electric cavity
)
0.99 kWh/cycle
Energy consumption required to heat a standardized
load in a cavity of an electric heated oven during a cycle
in fan-forced mode per cavity (electric final energy)
(EC
electric cavity
)
0.89 kWh/cycle
Energy Efficiency Index per cavity (EEI
cavity
)
106
Ecodesign requirements according to EU regulation No. 66/2014
Item
Value
Stage 1
Stage 2
Stage 3
EEI
cavity
106
1 year after
enter into force
<146
3 years after
entry into force
<121
5 years after
entry into force
<96
EN-14
Downloaded from www.vandenborre.be