u s e r u s e r m a n u a l m a n VO multifun BAN D ction dig ital dis LU M E S u DBB play EQ a CLOSE PLAY MODE SET TRACK / TUNE REMAIN l P STOP PAUSE PLAY TM9158 TM9159 RCD025 It is important to read this instruction book prior to using your new product for the first time.
Safety Information EN BLUE = NEUTRAL/BROWN = LIVE UK Plug Information CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPLY 230V. It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below. The moulded plug cannot be rewired and if removed must be disposed of safely.
Safety Information CAUTION! Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER λ = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit. This unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetlc compatibillity.
Table of Content EN CD player ............................................ 8 Safety Information Main Unit ......................................................... 3 Remote Control (For TM9159 Only) ............... 4 Remote Control Battery Installation (For TM9159 Only) ....................................... 4 Notes on CD-R/CD-RW Discs ............................ 8 Selecting CD Mode .......................................... 8 Loading Disc .....................................................
Before You Begin Useful Advice Battery Power • Do not use your system immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. If moisture forms inside this system, it may not operate properly. To correct the problem, turn off the power and wait about 30 minutes for moisture to evaporate. • This system is fitted with a laser. To avoid accidents, it is to be dismantled by qualified technicians only.
General Controls EN Main Unit VOLUME BAND EQ DBBS multifunction digital display CLOSE PLAY MODE SET TRACK / TUNE STOP TO A P LO REO CASSETTE RE D STE COR P SYSTEM DE AUTO STO R REMAIN P PLAY PAUSE / ON STANDB Y RADIO TAPE CD REC PLAY REW FWD STOP II EJECT PAUSE VOLUME BAND EQ DBBS multifunction digital display CLOSE STANDBY / ON - RADIO / TAPE / CD - Turns the unit on/ off; Selects among radio, tape and CD mode.
General Controls Remote Control (For TM9159 Only) EN BACK / STAN ON TI CD TRACK / TUNE BACK / FWD - In radio mode - Tunes up or down radio frequency. Y DB FUNC FUNCTION / STANDBY - Turns the unit on/ off; Selects among radio, tape and CD mode. CD TRACK / TUNE FWD AY / PAUSE PL PLAY / PAUSE REMAIN CD STOP MUTE VOL SET VOL DBBS B A ND MODE PLAY P RE In CD mode - Searches/ skips CD track backward or forward. L EQUA IZER S OU N D CD STOP - Starts or pauses CD play. - Stops CD playback.
Display EN Digital Bass Boost System FM stereo signal is detected. REPEAT Preset EQ settings Rock, Jazz, Pop, Classic, Flat R J P STEREO FM C MW LW FM, MW and LW radio band Repeat mode - REPEAT - repeat whole disc - flashing REPEAT - repeat - Shows volume level current track when adjusting volume In CD mode Random - Track number (shows playback during disc playback) - Total track number in CD stop mode VOL. - Program track PRESETPROG.
Radio Select Radio Mode Setting Preset Stations Manually When the unit is turned off, press STANDBY / ON - RADIO / TAPE / CD once to select radio mode. 1. In radio mode, press BAND to select radio band. 2. Press TRACK/TUNE or to select the station to save as a preset station. 3. Press SET. 4. Press P repeatedly to assign the preset station number. 5. Press SET to confirm. 6. Repeat steps 2 to 5 to set additional preset stations. Select Radio Band Press BAND to select FM, MW and LW band.
Tape Player Recording to tape EN From radio TO / ON A P LO REO CASSETTE RE D STE COR P SYSTEM DE AUTO STO R STANDB Y RADIO TAPE CD REC PLAY REW FWD STOP II EJECT PAUSE VOLUME BAND EQ DBBS multifunction digital display CLOSE Playing a tape 1. Insert a tape into the deck. 2. Press STANDBY / ON - RADIO / TAPE / CD until RADIO mode is selected. 3. Press BAND to access the desired radio band. 4. Press TRACK/TUNE or to tune to the station to be recorded. 5.
CD Player CD-R / RW This unit is compatible with audio CD-R/RW discs. Play and Pause 1. In stop mode, press PLAY/PAUSE to begin CD playback. 2. During CD playback, press PLAY/PAUSE pause playback. Press again to resume. EN to Notes on CD-R/RW • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read.
CD Player EN Clearing program list Programming 1. In stop mode, press SET to enter program setting mode. The program location and the track shows on the display with the PROG. and TRACK icons flashing. - 2. Press TRACK/TUNE or to select the track you want to program. 3. Press SET again to confirm your selection and access the next program location. 4. Repeat steps 2 to 3 to program to a maximum of 20 tracks. 5. Press PLAY/PAUSE in program mode to start program playback (PROG.
Troubleshooting Tips EN Problem Solution System doesn’t turn on • Unplug the unit for a moment, and then plug it back in. • Check the outlet by plugging in another device. No sound • Adjust volume setting. • Make sure you’ve selected the correct function. Poor radio reception • Adjust the antenna for better reception. • Try turning off electrical appliances near the unit, such as hair dryers, vacuum cleaners, or fluorescent lights.
Maintenance Cleaning the exterior CD Lens Care • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth • Clean the exterior with a soft clean cloth or slightly moistened chamois leather. DO NOT use solvents as it may cause damage to the unit. • When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system.
More Information Safety Precautions Headset Safety • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician. • Never operate this product with the cabinet removed. • Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. • Keep your unit away from humid areas and abnormally hot places. • Do not touch the player with wet hands.
multifun BAN D ction dig PLAY MO DE SET TRACK P PLAY THOMSON 46, quai Alphonse Le Gallo 92648 Boulogne Cedex FRANCE 55900130 www.thomson.