Operation Manual
P20
MAIN MENU
TV Resolution
If the video does not appear correctly, change the setting. These settings match the most
common settings for HDMI.
576i: For analogue TVs (on Scart connection).
576p: For digital SD TVs (some digital TVs do not support this mode).
720p_50Hz: For digital HD TVs (on HDMI connection).
1080i_50Hz: For digital HD TVs (on HDMI connection).
1080p_50Hz: For digital HD TVs (on HDMI connection).
Auto: The best possible resolution available will be auto negotiated by between
TV and receiver (‘handshake’) when using a modern digital HD TV when
connected with an HDMI cable.
Digital Audio Output: Select digital audio output mode. Settings affect S/PDIF output.
LPCM – audio from any format will be converted to digital stereo PCM
format.
RAW – audio from receiver will be sent in original digital format to be used
in combination with Home Theatre Sets or Digital Amplifier with Multi
Audio capability.
Auto Switch Off
Auto Standby is a new, power saving feature that helps you reduce power consumption. It will
switch o the receiver when no command is given for the dened period of time. It is set per
default to 3 hours. With the tu buttons you can select between dierent time intervals or O for
disabling the feature.
NOTE: If there are timers running, the auto standby function will be disabled for the
booked time.
TV Brightness Some adjustment can be made to the brightness of the picture.
TV Contrast Some adjustment can be made to the contrast of the picture.
TV Saturation Some adjustment can be made to the colour saturation of the picture.
These features are useful for analogue TVs, in practice, best left on default 50.
7.2.5.5 Adv Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the dened channels at a
particular date/time. The timer menu can be entered directly from viewing mode by pressing the
BLUE button.
Add: Press OK to add a new booking. In the appearing dialog select channel
type and number, the starting date and time, end time, repeat cycle mode
(once, daily, weekday, weekend day or weekly). Tip: For selecting the
channel number you can use the 0~9 buttons.
When you have entered all parameters, press OK to store your booking.
To edit an existing booking select that booking and press the OK button.
Del: Press the RED button to delete a booking from the list. Press OK to confirm
deleting or EXIT to cancel.
Page Use YELLOW and/or BLUE to jump quickly through your list of bookings.