User's Manual

48
T1960 Time Settings
R9
*IMPORTANT
If you have subscribed to
your network’s Caller-ID
service the date and time
will be set automatically
when you receive your first
call and you will not need to
set the date and time
manually, although this is
an option. However the
Date and Time will be
updated whenever a Caller-
ID is received.
12-HOUR and 24-HOUR
TIME FORMAT
Information
When entering a time into
the T1960 you must use the
12-hour time formatting
(setting AM or PM as
appropriate) whether the
time format selected is 12-
hour or 24-hour. For
example to set the time to
9:30 am (i.e., 09:30 in 24-
hour format), you would
enter
0
9 3 0
and then press
‘#’ to toggle select
AM
. To
enter a time of 9:30 pm (i.e.,
21:30 in 24-hour format),
you would enter
0
9 3 0
and
then press ‘#’ to toggle
select PM.
ALARM ON INDICATOR
When the alarm is turned
on, the
icon is shown
next to the display time.
T1960 Time Settings
Automatically Setting Date and Time
The Date and Time are automatically updated
when a call with Caller-ID is received.
Manually Setting Date and Time
If you do not have Caller-ID you can set the
Date and Time as follows:
1. Press
Menu, then use
to select
Time
settings then press
OK.
2. Set Date & Time is highlighted. Press
OK
.
Set Date
3. Enter the date, e.g., _0_ _4_ _2_ _2_
for
April 22
nd
. Press
OK to confirm.
Set Time
Enter the time in the 12-hour format. For
2:30pm (or 14:30 in 24-hour format), press _0
_
_2_ _3_ _0_ then press _#_ to toggle select
‘PM’. Press
OK
to confirm.
For 2:30am, press _0
_ _
2
_ _
3
_ _
0
_
then
press _#_ to toggle select ‘AM’. Press
OK
to
confirm.
Time Format (12 hr or 24 hr)
1. The display time can be displayed as 12
hour or 24 hour format.
2. Press
Menu then use
to select
Time
Settings. Press
OK
. Press
to
highlight Time format then press
OK.
3. Highlight 12 Hour or 24 Hour then press
OK.