User's Manual

T1960 Call Lists

Dial a Selected Entry

From the Received Calls list:

1. Press

or to scroll through the list and highlight an

entry.

2. Press

. The T1960 will dial the displayed number.

If the Area code has been set, you may need to format the number

for correct dialing, under some circumstances. To format a number:

1. Press

Options then select Call and OK to display the number.

2. You can format the number to be either:

•

7-Digits (7-digit number only, Local)

• 10-Digits (Area-Code+ Number, Regional)

• 11-Digits (1+Area-Code+Number, Long Distance)

3. Press

or to change from 7 - 10 - 11 digit formatting.

4. Press

OK to dial the highlighted number.

From the Dialed Calls list:

1. Press

or to scroll through the list and highlight a

previously dialed number.

2. Press

the T1960 will dial the displayed number.

If the Area Code has not been set the T1960 will only

dial the

displayed number after you press

Call. You cannot format a number

unless the Area Code has been set.

See page 39 for information about setting Area Codes for the T1960.