Operating Instructions and Installation Instructions

3
E-DOC-CTC-20051017-0035 v1.0
Chapter 1
Introducing the SpeedTouch™
1 Introducing the SpeedTouch™
Introduction In a minute you will be able to access the Internet using your
SpeedTouch™516
(v6)(i) Residential ADSL Gateway.
This Installation and Setup Guide will show you how to set up your SpeedTouch™
and how to connect a computer or a local area network (LAN) to the Internet.
Identifying your
SpeedTouch™
The label on the bottom of your SpeedTouch™ informs you about the
SpeedTouch™’s:
 Product name
 Model number
 Serial number
 Power requirements
DSL variants The SpeedTouch™ comes in two ADSL variants:
 POTS: The SpeedTouch™516(v6) connects to an analogue Plain Old Telephone
Service (POTS) line.
 ISDN: The SpeedTouch™516(v6)iconnects to an Integrated Service Digital
Network (ISDN) line, enabling residences with an ISDN line to use the ADSL
service.
You can easily identify your variant by checking the product name printed on the
label on the bottom of your SpeedTouch™.
!
Do not remove or cover the label.
The ... variant supports ...
POTS  ADSL
 ADSL2
 ADSL2+
 RE-ADSL
ISDN
 ADSL
 ADSL2
 ADSL2+
!
Only use the SpeedTouch™ variant which is appropriate for the DSL service
provided to your premises.