Operating Instructions and Installation Instructions

Chapter 2
Basic Installation
21
E-DOC-CTC-20051017-0035 v1.0
2.6 Basic Security
Default user name and
password
The SpeedTouch™ comes with a default user. Its user name is ‘Administrator’ and
the default password is blank.
Changing your password For security reasons, it is recommended to set a password to access the
SpeedTouch™. Proceed as follows:
1 Go to the SpeedTouch™ home page (http://speedtouch.lan or 192.168.1.254).
2 In the left pane, choose Toolbox > User Management.
3 In the Pick a task list, click Change my password.
4 Enter a new password and confirm.
Do not forget this logon information or you will be forced to reset the
SpeedTouch™ back to its default configuration.