Operation Manual

- EN 4 -
Diagram and Key Functions
Key Functions:
1. Speaker
2. Power-On Indicator Light
3. Radio Frequency Bar
4. Band Selector: 4 bands — FM/SW/MW/LW
5. Rod Antenna
6. Volume Control (On/Off)
7. Tuning Control
8. Aux-In Jack
9. Headphone Jack
10. Battery Door
11. AC Power Cord (stored behind the battery door)
1) Operation
• Release the AC power cord behind battery door & plug the cord (11) into an AC 230V ~ 50 Hz socket
• Rotate the Volume Control (6) to turn on the radio. The Power light (2) will be on.
• Switch band selector (7) to select FM/SW/MW/LW
4 bands: see Frequency bar (4)
FM 87.5 ~ 108 MHz
SW 2.3 ~ 22 MHz
MW 522 ~ 1620 KHz
LW 144 ~ 290 KHz
• Rotate the Tuning Control (7) and the Frequency Bar (3) to select the station you would like to hear.
• Adjust the sound level by rotating the Volume control (6).
• To turn off the radio, turn the Volume (6) to the “OFF” position.
Rod Antenna (5)
When receiving FM/SW stations, always keep the Rod Antenna fully extended.
If the signal is weak, adjust the antenna position until you get the strongest signal.
MW/LW: If the signal is weak, adjust the radio’s position until you get the strongest signal.