Operation Manual
15
Carefully read the instructions of this manual, respecting recommendations for use and safety.
Keep this document and tell potential users about it.
SAFETY RECOMMENDATIONS
PORTABLE CD RADIO
RCD203U / RCD204U / RCD205U
EN
ATTENTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
nThis equipment complies with the current standards
applicable to this type of product.
n This equipment is designed to work with the local electricity
supply. Comply with the information given of the identication
plate, xed on the back of the equipment.
ATTENTION: Do not expose the equipment to rain or damp
to prevent any risk of re or electric shock. Therefore, do not
use the equipment near a tap or in a damp room (bathroom,
swimming pool, sink, etc.). Do not place any objects lled with
water (ex.: vases…) on the equipment.
o To prevent any risk of electrocution, do not open the case.
Entrust the equipment's maintenance exclusively to qualied
personnel.
o If liquid penetrates inside the case, unplug the equipment
and get it checked by a qualied technician before using it
again.
Laser equipment
ATTENTION: This equipment comes within the category of
CLASS 1 LASER products. To prevent direct exposure to the
laser beam, do not try to open the case.
Do not stare at the laser beam.
Never touch the laser lens located in the disc compartment.
Installation
o Do not place the equipment in direct sunlight, near heating
equipment or any heat source or in a place subject to
excessive dust or mechanical shocks.
o Do not expose to extreme temperatures. This equipment is
intended for use in a temperate climate.
o Do not place any heat emitting source (candle, ashtray, etc.)
near the equipment.
o Place the equipment on a at, rigid and stable surface.
o Install the equipment in a sufciently ventilated place to
prevent any internal overheating. Avoid enclosed spaces
such as bookcase, cupboards, etc.
o Do not obstruct the equipment's ventilation holes. Do not
install the equipment on a soft surface, such as a carpet or
covers, that could block the ventilation holes.










