User's Manual

3. The receiving handset m ust press the int/conf or talk/callback or spk

button to answ er the intercom , then both intercom users may speak

privately. The external caller cannot hear the intercom conversation.

SENDING PARTY RECEIVING PARTY

4. Press the int/conf button on the sending handset to initiate a

conference between handset 1 and handset 2.

NOTE: Press th e exit button on th e h andset to cancel the in tercom call, and

the sendin g party may continue to talk to th e external party. Or the callin g

party may press the talk/ callback button to transfer the call to the receiving

party wh o may speak to the extern al caller independen tly.

NOTE: A h andset can en ter conferen ce directly by pressing talk/ callback

while the other h andset is on an extern al call.

STORING A REDIAL NUMBER

1. Make sure your phone is OFF (not in TALK mode).

2. Press the delete/redial button on the handset.

3. Press CID/VOL ( or ) button to scroll to the desired redial number.

4. Press the m emory button, and the display show s

ENTER NAME

5. Repeat steps 4 through 7 in Add M emory.

NOTE: If the redial number h as more than an 24 digits, it cannot be

stored in memory. “UNABLE TO STORE” is displayed.

INSERTING A PAUSE IN THE DIALING SEQUENCE

If a pause is needed to wait for a dial tone press the # pause button on

the touch-tone pad to insert a delay in dialing sequence of a stored

telephone num ber (for exam ple, after you dial 9 for an outside line, or

wait for a com puter access tone.) Each pause counts as one digit and

show s as

“ P”

in the dialing sequence.

HANDSET 2

INTERCOM

HOLD 01:40 VOL1

HANDSET 1

INTERCOM