Operation Manual

5
Do not overload wall outlets and extension cords as this may cause a fire or
electric shock.
To eliminate any voltage within the telephone, unplug the power cord from the
mains.
Observe the polarity indicated while installing the batteries.
It is dangerous to use other battery types or non-rechargeable batteries: they can
cause interference and/or damage to the product. The manufacturer shall not be
liable for any damages caused by such non-compliance.
Do not immerse a battery in water and do not throw it in a fire.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
If the appliance is not use for a period of time, please unplug the adapter in order
to save electricity.
The external flexible cable of the adapter cannot be replaced, If the cord is
destroyed, the adapter should be destroyed.
CAUTION
Please use the bundle adaptor for operates the device only. The adaptor model
number: SW-075060EU
Failure to observe the correct polarity or voltage of the adapter may cause damage
to the telephone base.
For phone models CONECTO 200:
Adapter for the telephone base: SW-075060EU
Input: 100-240V~ 50/60Hz 200mA
Output: DC 7.5V 600mA
Here are the main functions:
- The SOS key is to be found at the back of the phone. With a simple press on
the SOS key, up to 8 of your contacts can be called to be notified about the
emergency.
- If the first contact does not pick the phone after five rings, the phone will
automatically try to call the next SOS number.
- You can make and receive calls with the handset.
Important remark
Range of operation: the maximum range separating the handset from the base is
300 meters (without obstacles) or 50 meters with obstacles. Thick concrete walls
will reduce the transmission range.