Operation Manual

25
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to PABX Number.
3. Press MENU/OK key. The screen shows “Number ?” Use the keypad to enter the
PABX number and press MENU/OK key to confirm.
Remark: After the PABX number is set, the outgoing call would be added with the
PABX number automatically. If PABX number is not necessary, please do not set it.
Language
This language menu is for medallion (not provided in this package) low battery voice
announcement, SOS call and room monitor prompt. There are 2 language for
selection: language 1 is French, and language 2 is Spanish.
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to Language.
3. Press MENU/OK key. Scroll ▲/▼key to select Language 1 or 2.
Settings for Conecto 100 (not provided in this package)
This menu is only used when there is medallion (CONECTO 100) registered to the
base. You can modify the settings of medallion in this menu.
 Internal/External Ring
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select INT Ring or ETX Ring. Press MENU/OK key. Then you can select the
ringtone and adjust the volume for the internal/external call.
 Vibrating
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select Vibrating. Then you can set the vibration on or off.
 Audio Setup
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select Audio Setup. Press MENU/OK key and scroll ▲/▼key to adjust the
speaker volume of medallion.